Last Updated on April 5, 2023
If you are looking for the best vise for gunsmithing, you may feel overwhelmed with all the different options. But don’t worry, we’re here to help! In this review, we’ll take a look at some of the best kw on the market, so you can make an informed decision about which ones are right for you.
There are so many vise for gunsmithing brands on the market like Tipton, MTM, ATLIN, Real Avid, Mission Automotive, Mechforce, it can be tough to know which one will be the best. No worries, we’ve got you covered.
Best vise for gunsmithingTipton Ultra Gun Vise with Heavy-Duty, Custom
Our Rating
- DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch
- EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included)
- VERSATILE: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps
- NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction
- DURABLE: Features a steel tube frame structure
- CAUTION: Designed for working on a firearm and should never be used as a shooting rest – also should not be used as a bow press
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton. Please contact Tipton customer service for assistance
MTM GV-30 Gun Vise Cleaning Maintenance Cente
Our Rating
- Quick clamp up using a single cam activated lever for a secure non-marring hold
- Ideal for all Gunsmithing needs
- Room to organize cleaning supplies with various sized compartments for patches, screw driver bits, jags, brushes, solvents and cleaning rods
- Mounted on four skid-resistant rubber feet and is free-standing or can be bolted down
- Made in USA,xa0 out of chemical and solvent resistant polypropylene plastic
Tipton Gun Vise with Adjustable Cradle and No
Our Rating
- EASE OF USE: Securing your firearm in the vise is simple with a quick-release cam
- VERSATILITY: The front cradle supports nearly all forends, right side up or upside down
- DURABLE: Non-marring, solvent-resistant polymer stands up to years of hard use
- CONVENIENT: The base includes small compartments to organize your screws, jags and brushes
- INNOVATIVE: A rear pivot arm adjusts to fit wide and narrow stocks
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton. Please contact Tipton customer service for assistance
ATLIN Vise Jaws 6″ – Nylon, Non Marring Soft
Our Rating
- Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials
- Easy Install – The soft jaws attach to your vise with 3 neodymium magnets; no screws or bolts needed
- Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings
- Universal Compatibility – ATLIN vice jaws are compatible with any 6″ milling vise, machine vise, drill press vise, bench vise
- Sizing & Specs – vise jaws measure 6″ in length, Groove sizes: 3/8″ @ 60° angle | vertical grooves: 1/4″, 1/8″, 1/16″ 5/8″ | horizontal groove: 1/4″ – See second photo for further details
Tipton Best Gun Vise with Secure Adjustable C
Our Rating
- EASE OF USE: L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape
- VERSTILE: Easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects
- DURABLE: Non-marring, solvent-resistant polymer stands up to years of hard use
- CONVENIENT: Flat and round bottom compartments hold bottles, screws and parts
- INNOVATIVE: Customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton. Please contact Tipton customer service for assistance
Real Avid Precision Bench Vise with Clamping
Our Rating
- SWIVELING multi axis vise body allows for superior range of motion while objects remain securely orientated in numerous positions. Left 40 degrees, Right 40 degrees, Back 50 degrees, Front 90 degrees.
- LEVELING Knob allows for six degrees of side-to-side micro adjustment for optimal scope or accessory leveling and more.
- FAST adjust hand crank, speed cam ball and socket locking lever and articulating ball joint make this bench vice the most versatile rotational work bench vise made
- LOCKING PIN intersects and locks the ball and socket joint providing superior leverage for rock solid high torque projects
- REVERSIBLE steel jaw plates and 2 in 1 non-marring reversible jaw sleeves protects while holding objects safely and securely for a variety of hands-free tasks.
Tipton Standing Ultra Gun Vise with Customiza
Our Rating
- DIMENSIONS: 35″ H x 54″ W x 30″ D Extended, 6.5″ H x 43″ W Collapsed and weighs 20 lbs
- EASE OF USE: Oversized leg levers for effortless setup and collapses down for easy transport and storage, removing the need for a table or a bench
- VERSATILITY: The Ultra Gun Vise modules feature non-marring, glass-filled nylon clamps and removable accessory/tool trays that allow for an adjustable and customized setup
- DURABLE: With a lightweight, rigid, all-steel construction this portable bench is solid ensuring it is ready for all situations
- CONVENIENT: The 35-inch height creates optimal comfort while working and it features a built-in bottle opener
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton. Please contact Tipton customer service for assistance
Vise Soft Jaws / Vice Jaw Pads – Magnetic – 4
Our Rating
- Ideal For A Variety Of Materials: Our magnetic vise jaws / vise pads are ideal for holding wood, metal, plastic, tubing, threaded items, etc. – nearly anything round, flat or irregular. Our jaw covers are useful for woodworking, jewelry making, gunsmithing and so much more
- Highly Compatible: Our soft jaws are highly compatible with a wide variety of vises, tools and uses, including vise block, drill press vise, brass hammer, clamps, bench vise, mill clamps, etc. They’re great mill accessories and drill press accessories
- Built To Last And Built To Protect: Made from high-quality thermoplastic polyurethane (TPU) rubber, our soft vise jaws / vice jaws are hard enough to hold items in place but soft enough to protect finished, anodized or delicate surfaces from damage
- Unique Multi-Groove Design: Multi-groove design provides a number of highly useful holding slots to keep items in place. 90 degree angles for widths of approximately 1/16″, 1/8″, 1/4″ and 3/4″. 60 degree angle for width of approximately 13/32″
- Magnetic Inserts For Broad Compatibility: Strong embedded magnets help to keep vice jaws / vice jaw pads securely in place. 4.5-inch length provides compatibility with vises of various sizes. Product includes one set of vise jaw pads (2 pads)
Tipton 1911 Mag Well Vise Block with 180 Degr
Our Rating
- DIMENSIONS: 14 x 8 x 3 inches
- CONVENIENT: Supports 1911’s for cleaning and light gunsmithing
- VERSATILE: Center section rotates 180 degrees in 15 degree increments and locks into place at the desired location
- DURABLE: Solvent resistant polymer provides durablity and is non-marring
- BE PREPARED: Also designed to mount to your bench top, with the included fasteners
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton. Please contact Tipton customer service for assistance
- Supports 1911 for cleaning & light gunsmithing operations
- Center section rotates 180Degree (in 15Degree increments) and locks into place at desired location
- Also designed to mount to your bench top, with the included fasteners
- Solvent-resistant polymer provides durability and is non-marring to surfaces
Mechforce – Professional Grade Heavy Duty Bar
Our Rating
- Including 4 pieces of leather inserts, specially treated to increase the static friction coefficient to μ = 0.9 as well as protecting the barrel from scratched up
- Chamfered groove design to reduce the surface contact stress to the barrel, protecting the barrel from dents
- Heavy duty components designed to last; ¾” thick aircraft grade high strength aluminum bodies, high strength grade 8 studs, heavy duty flange nuts, super tough raw cowhides
- Designed for barrel Outside Diameter from 0.67” to 1.375”
- MADE IN USA
Best vise for gunsmithing Buying guide
When considering purchasing a product, it is important to think about what you need and want the product to do for you. There are many factors that can influence your decision when it comes to choosing a product, such as price, quality, features, and more. It is important to compare products before making a final decision to ensure that you are getting the best possible value for your money. Here are the few things that you need to look at before purchasing a product:
1. What you will use the product for?
Another factor to consider before purchasing a product is what you will use it for. If you are only going to use it occasionally, there is no need to spend a lot of money on a high-end model. However, if you plan to use it regularly, it is worth investing in a quality product.
2. Price
The price of the product is one of the most important factors to consider. You need to find a balance between quality and price. It is important to remember that cheaper does not always mean better. Sometimes, it is worth spending a little extra money on a high-quality product.
3. Features
Another important factor to consider is the features of the product. Make sure that the product has all of the features that you are looking for. For example, if you are looking for a television, pay attention to things like picture quality, sound quality, and extra features like built-in Wi-Fi or Blu-ray player.
4. Brand name
One final factor to keep in mind is brand name recognition. In general, more well-known brands tend to charge more for their products. However, they also tend to be more reliable and offer better customer service.
5. Quality of the product
Your first priority should always be the quality of the product. It is advisable to read online reviews or ask friends and family for recommendations.
6. Customer service
A good company will have responsive and helpful customer service available in case you have any problems with your purchase.
7. The guarantees and warranties offered
Most products come with some kind of guarantee or warranty. Make sure to read the fine print before making a purchase.
8. The return policy
All reputable companies should have a return policy in case you are not satisfied with your purchase.
9. User reviews
Once you have narrowed down your options based on quality, it is time to read user reviews. These can be found on the website of the product or on online forums. Pay attention to both positive and negative reviews, as they can give you an accurate picture of what to expect from the product.
Frequently Asked Questions about Vise for gunsmithing
Where Can I Buy This Product?
vise for gunsmithing can be purchased online or at a store near your home or work. Each option has its advantages and disadvantages. You might need to wait longer for your item to arrive at your home if you choose an online store. Due to the fact that the cashier already assembled everything, the order is ready to ship out immediately after payment is received.
How much money do I need to spend?
Purchase the product that fits your budget if you can’t afford a high-quality product. The best quality vise for gunsmithing, however, will cost more than what you originally planned to spend if you want it.
When making a purchase, is after-sales service important?
When looking for a reliable vise for gunsmithing company, make sure they offer excellent after-sales service.
The company may need to be reconsidered if any complaints have been filed against it.
Also, be sure to ask about the return policy of a company, as some do not allow returns and/or require receipts.
Leave a Reply