Best Point To Point Wireless Bridge 2022

Last Updated on March 24, 2023

If you’re like most people, you spend a lot of time researching products before you buy them. You want to make sure you’re getting the best possible value for your money. But with so many product reviews out there, it can be hard to know which ones to trust. That’s why we’ve done the legwork for you and compiled a list of the best point to point wireless bridge

There are so many point to point wireless bridge brands on the market like UeeVii, KuWFi, Tycon Power Systems, Richbarn, Fretech, TP-Link, GOODTHREE, it can be tough to know which one will be the best. No worries, we’ve got you covered.

PRODUCT
Wireless Bridge, UeeVii 5.8G Outdoor CPE Poin…	Check Price
KuWFi 2-Pack 300Mbps Wireless Bridges, Wirele…	Check Price
The EZ-Bridge-Lite EZBR-0214+ High Power Outd…	Check Price
Wireless Bridge Gigabit High Speed, UeeVii CP…	Check Price
Point to Point 5.8G Wireless Bridge 1-Pair wi…	Check Price

Table Of Contents show

Wireless Bridge, UeeVii 5.8G Outdoor CPE Poin

CPE450 is a 5.8G Long Range WiFi Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional
100Mpbs digital display bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)， supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable
Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM
The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ

KuWFi 2-Pack 300Mbps Wireless Bridges, Wirele

【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode, for different network environment】 Point to Point/Multi-Point(1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you ’eyes on’ places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge
【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi line of sight wifi bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND

The EZ-Bridge-Lite EZBR-0214+ High Power Outd

The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
It complies with the 802.11g and n standards to insure interoperability.
The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.
It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.
Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites.

Wireless Bridge Gigabit High Speed, UeeVii CP

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps.
1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability
Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.
Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450

Point to Point 5.8G Wireless Bridge 1-Pair wi

Superior Speeds: Wireless bridge kit built-in14dBi 2×2 dual polarized directional MIMO antenna and transmission using 5.8Ghz wireless technology.
Outdoor Use Durable: Outdoor wireless bridges with IP55-level waterproof and dustproof casing ensures it can withstand harsh outdoor environments.
Easy to Installation: Wifi bridge CPE pairing can be done by dialing, no need GUI access, no need trenching, no need excessive cabling, detachable and recycling.
24V PoE Injector: Included 24v LAN/PoE adapter features disconnect, short-circuit and surge protection,Point network bridge support 12V 1A DC adapter power(Not included),not support powered by 48V PoE switch.
Long Range P2P Bridges: More than 2 mile long-range wireless transmission in pointtopoint or point to MultiPoint transmission
High Powered: 27 dBm high transmit power extends Wi-Fi building to next building(Garage,Warehouse,Barn,Shop,Villa,Pier,RV,Neighbor)
Lifetime Technical Support: Our Ethernet bridge provide1-year WTY and free 24/7 technical support, you can work with confidence.
FCC ID：2A5WF-ZE-CPE520, this cpe wireless bridge complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Wireless Bridge Set 900Mpbs 5.8G WiFi Outdoor

【What Is CPE 200】: CPE200 wireless bridge is a 5.8G high-performance,high-speed outdoor long-distance wireless network bridge.The advantage is long transmission distance, strong penetrating ability, and strong anti-interference ability .Point-to-point and point-to-multipoint outdoor coverage and applications without having to layout network cables making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
【5.8G Technology & IP65 Level Waterproof Design】:5.8G frequency using a new generation of 11ac technology is better than 2.4 G traditional CPE. It makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. Wireless bridge IP65 dustproof and waterproof, lightning protection,and antifreeze,is very suitable for outdoor use.
【2-3KM Transmission Distance】:This wifi outdoor bridge built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals,data rate max up to 900Mbps between the bridge,which supports 2-3KM long-distance wireless transmission.suitable for warehouses, garden,barns, shops, or garages next to your house.
【Point to Point Connection for Wireless Transmission】: Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server. It transmits via wireless WiFi, reducing the trouble of wiring cable.
【Tips on Product How to Use】：Full information LED display, include host-client mode(H or C,the number behind is the channel number), signal strength(P,a number will be displayed after the pairing is successful), IP address(A), port /wifi/power led, the F button can switch the LED display info, the S button can complete the setting, more clearly know the device status, more conducive to debugging and maintenance.

TP-Link 2.4GHz N300 Long Range Outdoor CPE fo

Built in 9dBi 2×2 dual polarized directional MIMO antenna
Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable
System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
Centralized management system Pharos Control
AP/ client/ AP router/ AP client router (WISP) operation modes
Passive PoE adapter Suppots up to 60 meter (200 Feet) Power over Ethernet deployment and allows the device to be reset remotely
Connectivity technology: Wi-Fi Built In

CPE220 5.8G Wireless Bridge PTMP WiFi PTP Poi

GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the “Link” green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.

KuWFi 2-Pack Wireless Ethernet Bridge, 900Mbp

【What KuWFi CPE200 is】an 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 2KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you ’eyes on’ places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 2KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable
【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND

Outdoor Wireless Ethernet Bridge, KuWFi Long

KuWFi CPE550 Outdoor Wireless Bridge is a 5 GHz high-powered long-distance 11AC wireless outdoor AP/client bridge offering dual-PoE Ethernet ports and a high-gain directional antenna that emits a narrow signal beam, limiting interference and ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over long distances[Ethernet Port: 10/100Mbps]
Easy to Use – Outdoor wifi bridge CPE with an LED display. Point to point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, support WiFi Coverage & Camera Surveillance(Point-to-Point/Multi Point or Multi Point-to-Multi Point)
High Performance Design – Powerful 18dBi High-Gain Antennas Extend Networks to 5 KM Point-to-Point, for line of sight wifi bridge. Optimal Bandwidth Supports Heavy Video Delivery Over Long Distances
Easy to Install & Support PoE Power Supply – PoE Compliant Ports Offer Flexible Power Options for an IP Camera or AP, 360-Degree, 3-Axis Pivoting Arm Locks for Precision Alignment, for building to building wireless wifi bridge
Customer Service – For 30 days after the date of purchase, return your undamaged KuWFi internet bridge and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND

Find on eBay Find on Walmart

Best point to point wireless bridge Buying guide

When it comes to finding the best kw, there are a few things you need to take into account. The first is what your needs are. What are you looking for in a product? Do you need something that is durable? Something that is easy to use?

Once you know what you need, you can start to look at different products. Read reviews to see what other people think about them. See if the product has any awards or accolades.

Don’t just go for the first product you see. Take your time to find the best one for you. That way, you’ll be sure to get the most out of your purchase.

1) Does the product fit your needs?

Second, think about whether or not you can afford the item. It’s important to stay within your budget.

2) Can you afford the product?

First, you should consider what you need the product for. Is it the right size? Does it have the features you’re looking for?

3) The reputation of the company: This is probably the most important factor to consider. Research the company online, read reviews and testimonials and see what others have to say about their products.

4) Brand name: One final factor to keep in mind is brand name recognition. In general, more well-known brands tend to charge more for their products. However, they also tend to be more reliable and offer better customer service.

5) Quality of the product: Your first priority should always be the quality of the product. It is advisable to read online reviews or ask friends and family for recommendations.

6) Warranties and guarantees: They show that the company is confident in its product and willing to stand behind it.

7) Customer service: A good company will have responsive and helpful customer service available in case you have any problems with your purchase.

8) Quality of the product: You have to ensure that the product is made of high-quality materials and it is durable.

9) Ease of use: The product should be easy to use.

Frequently Asked Questions about Point to point wireless bridge

This section answers common questions about point to point wireless bridge. Understanding people’s concerns is easier if you answer these questions.

Is this product worth investing in?

A product like this has a lot of value. A lot of unique features and easy to use

point to point wireless bridge can be sold in retail stores?

You don’t need to go to the store if you can get it delivered to your door.

When making a purchase, is after-sales service important?

When looking for a reliable point to point wireless bridge company, make sure they offer excellent after-sales service.

In the event that any complaints have been filed against the company, they may need to be reconsidered.

It is also a good idea to inquire about a company’s return policy, as some only allow a limited number of returns per year and/or require a receipt for returns.