Last Updated on March 18, 2023
When it comes to choosing the best 3d printer thermistor, there are many factors to consider. With so many products on the market, it can be hard to know which ones are worth your money. That’s why we’ve done the legwork for you and compiled a list of the top products on the market, based on reviews from experts and everyday users. We’ll be considering a range of factors, including price, performance, and features, to help you make the best decision for your needs.
There are so many 3d printer thermistor brands on the market like Comgrow, WINSINN, MakerHawk, Creality 3D, HICTOP, POLISI3D, Gnellkoor, E3D, Gulfcoast Robotics, it can be tough to know which one will be the best. No worries, we’ve got you covered.
Best 3d printer thermistorCreality 3D Printer NTC Thermistor Temp Senso
Our Rating
- Use for heated bed or extruder.Package include: 5 thermistors.
- NOTE: Not Fit for CR-10S Pro V2/Ender 3 MAX/CR-10s Pro/Prusa i3 3D Printer. Please confirm whether this thermistor is compatible with your 3D Printer Before buying.
- Wire length: 1m/39.4 inches.
- It has 2 pins female connector.
- Temperature sensor 100KΩ accuracy of ± 1%.
WINSINN HT-NTC100K Thermistor Sensor, Ender 3
Our Rating
- ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
MakerHawk 5pcs Aluminum Heater Block for MK7
Our Rating
- 3d printer heater block: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
- 12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 stainless steel; Lead wire: 0.3 square; 2080 high temperature resistant high quality oxide powder.
- NTC 3950 100K Thermistor: For 3D printers: use TEMP_SENSOR 11 in Marlin firmware; Resistance value at 25°C=100K;
- Cartridge Heater: The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas); Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
- We have a strong after-sales team, if you have any questions, please feel free to email us. Click on “MakerHawk-US”,then “Ask a question”.We will reply to you as soon as possible. Thank you for your cooperation!
Creality Original 3D Printer NTC100K Thermist
Our Rating
- ?【Upgrade NTC Thermistor】100% official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- ?【The Temperature Measurement】 -30 °C ~ +300 °C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- ?【Single-ended Glass Sealed】The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- ?【Easy to Install】Only 4 steps, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- ?【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours no matter what question.
HICTOP 100K ohm NTC 3950 100k thermistor 1.2m
Our Rating
- HICTOP 3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
- The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc
- There is a 2 pin female connector on the thermistor for 3D printer
- Wire length for the thermistor: 1.2m/47.2 inches.
- Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%
1piece 3D Printer 500℃ Thermistor T-D500 M3x1
Our Rating
- Package: 1piece T-D500 Thermistor cartridge with about 1 meter long cable
- Durable, Flexible and Long Lasting; 450℃ long hours guaranteed
- Compatible with PT100 V6 hotend block, Prusa i3 printer and This Thermocouple sensor is 3mm x 15mm cylindrical package for compatibility with all cartridge-style heater blocks.
Upgrade M3 Hex Screw in Fixing Thermistor 100
Our Rating
- M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
- DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
- Package: 1piece m3 screw in thermistor
- Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend “Simple ONE ” &”Hotend “All In ONE” #define TEMP_SENSOR_0 13
- For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
3D Printer NTC Thermistor, 6-Pack 3950 100K O
Our Rating
- 【Product Function】3D printer thermistor can be used for the heating bed or extruder hotend, which can accurately monitor temperature changes, avoid excessive temperature fluctuations affecting the printing effect, and ensure the safety of 3D printing work
- 【Compatible Model】NTC 3950 100K thermistor cable is 1 meter/39.4 inches long, the connector is 2pin XH2.54, compatible with most 3D printers in the market, such as Creality ender3, 3X, 3 pro, ender3 V2, ender5, ender5 Pro , Creative CR6, CR10, 10S, Pro, etc
- 【Temperature Check】NTC100K thermistor can measure the temperature change from -40℃ to +300℃, Temperature sensor 100KΩ accuracy ± 1%, Recommended parameters: R25℃=100K B25/50=3950K± 1%
- 【Package Included】3D printer thermistor kit contains 6 1m NTC100K thermistors. For the convenience of customers, the wires are connected by wire, and customers can cut and weld according to their needs
- 【After-sale Service】We provide product warranty or return and exchange service. If the product you receive is missing or there is a problem during the installation process, please contact us in time, and we will give you a satisfactory answer. Happy shopping
Genuine E3D Hotend Thermistor Cartridge Repla
Our Rating
- Direct replacement of cartridge type thermistor in E3D hotends.
- A custom made thermistor encapsulated into an easy to use cartridge package.
- Genuine Semitec 104GT thermistors used.
- Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)
[Gulfcoast Robotics] HEX EPCOS Thermistor Upg
Our Rating
- EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950 Bead Thermistors.
- Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board.
- Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius.
- M3x0.5 HEX stud threads in to the heater block for quick, secure installation.
- Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings.
Best 3d printer thermistor Buying guide
When considering purchasing a product, it is important to think about what you need and want the product to do for you. There are many factors that can influence your decision when it comes to choosing a product, such as price, quality, features, and more. It is important to compare products before making a final decision to ensure that you are getting the best possible value for your money. Here are the few things that you need to look at before purchasing a product:
1. What you will use the product for?
Another factor to consider before purchasing a product is what you will use it for. If you are only going to use it occasionally, there is no need to spend a lot of money on a high-end model. However, if you plan to use it regularly, it is worth investing in a quality product.
2. Price
The price of the product is one of the most important factors to consider. You need to find a balance between quality and price. It is important to remember that cheaper does not always mean better. Sometimes, it is worth spending a little extra money on a high-quality product.
3. Features
Another important factor to consider is the features of the product. Make sure that the product has all of the features that you are looking for. For example, if you are looking for a television, pay attention to things like picture quality, sound quality, and extra features like built-in Wi-Fi or Blu-ray player.
4. Brand name
One final factor to keep in mind is brand name recognition. In general, more well-known brands tend to charge more for their products. However, they also tend to be more reliable and offer better customer service.
5. Quality of the product
Your first priority should always be the quality of the product. It is advisable to read online reviews or ask friends and family for recommendations.
6. Customer service
A good company will have responsive and helpful customer service available in case you have any problems with your purchase.
7. The guarantees and warranties offered
Most products come with some kind of guarantee or warranty. Make sure to read the fine print before making a purchase.
8. The return policy
All reputable companies should have a return policy in case you are not satisfied with your purchase.
9. User reviews
Once you have narrowed down your options based on quality, it is time to read user reviews. These can be found on the website of the product or on online forums. Pay attention to both positive and negative reviews, as they can give you an accurate picture of what to expect from the product.
Frequently Asked Questions about 3d printer thermistor
Where Can I Buy This Product?
3d printer thermistor can be purchased online or at a store near your home or work. Each option has its advantages and disadvantages. You might need to wait longer for your item to arrive at your home if you choose an online store. Due to the fact that the cashier already assembled everything, the order is ready to ship out immediately after payment is received.
How much money do I need to spend?
Purchase the product that fits your budget if you can’t afford a high-quality product. The best quality 3d printer thermistor, however, will cost more than what you originally planned to spend if you want it.
When making a purchase, is after-sales service important?
When looking for a reliable 3d printer thermistor company, make sure they offer excellent after-sales service.
The company may need to be reconsidered if any complaints have been filed against it.
Also, be sure to ask about the return policy of a company, as some do not allow returns and/or require receipts.
Leave a Reply