Last Updated on December 20, 2022
If you are looking for the best 1000 watt amp, you may feel overwhelmed with all the different options. But don’t worry, we’re here to help! In this review, we’ll take a look at some of the best kw on the market, so you can make an informed decision about which ones are right for you.There are so many 1000 watt amp brands on the market like BOSS Audio Systems, Gravity, Crunch, Audiopipe, Rockville, it can be tough to know which one will be the best. No worries, we’ve got you covered.
BOSS Audio Systems PT1000 2 Channel Car Ampli
- Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs – Dimensions: 9. 5” x 10. 31” x 2. 25”, Weight: 6. 62 lbs.
- – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
Complete 1000W Gravity 8 Gauge Amplifier Inst
- High quality thick 17 feet ft 8 gauge GA power cable
- Premium 3 feet ft 8 gauge GA ground cable/ inline agu fuse holder & 40a and 60a fuse included!
- True sound 17 feet ft Double shielded RCA cable
- High quality 17 feet ft/ 18 ga turn-on cable & 20 feet ft/ 16 ga speaker wire
- All accessories/ terminal included! Perfect for any installer shop, great for car/ truck/ motorcycle/ RV/ ATV
New Crunch PX-1000.4 4 Channel 1000 Watt Amp
- Crunch PX 1000.4 4 Channel Car Amplifier
- 2 Ohms: 4 x 250 Watts
- 4 Ohms: 4 x 125 Watts
- Mono Bridged @ 4 Ohms: 2 x 5000 Watts
1000W Monoblock Amplifier Class D Amp Car Aud
- Monoblock 1000W RMS
- Bass Boost: 0dB – 12dB ; Bass Boost Frequency: 30Hz -80Hz
- Frequency Response: 30Hz – 180Hz
- Signal-to-Noise Ratio: >70dB
- Input Sensitivity: 0.2V – 5V
Crunch PX 1000.2 Power Amplifier (Class Ab, 2
- 250 Watts RMS x 2 @ 4 ohms
- 500 Watts RMS x 2 @ 2 ohms
- 1000 Watts RMS x 1 Bridged @ 4 ohm
- Total Peak Power: 1000 Watts
- Speaker-level (high-level) inputs
Rockville dB14 4000w Peak/1000w RMS Mono 2 Oh
- Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
- Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). – 2 Ohm: 1000 Watts x 1 Channel <1% THD+N. – 4 Ohm: 600 Watts x 1 Channel <1% THD+N.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). – 2 Ohm: 4000 Watts x 1 Channel. – 4 Ohm: 2400 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz – 250Hz.
- Subsonic Filter: 15Hz – 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.
- Frequency Response: 15Hz – 250Hz. Damping Factor: >150 @ 100Hz. 100 Amp Maxi Fuse. Dimensions: (W x H x L) 9″ x 2.4″ x 15.5″
Crunch PX-1025.4 1000W Powerzone Series 2-ohm
- Crunch Powerzone Series PX-1025.4 + Gravity Magnet Phone Holder Bundle
- Class-A/B Full Range 2 ohm Stable 4-Channel Amplifier
- 4 ohms: 125 watts x 4 chan. 2 ohms: 250 watts x 4 chan. Bridged, 4 ohms: 500 watts x 2 chan.
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Preamp RCA outputs to daisy chain multiple amps
Complete 1000W Gravity 8 Gauge Amplifier Inst
- High Quality Thick 17 Feet FT 8 Gauge GA Power Cable
- Premium 3 Feet FT 8 Gauge GA Ground Cable / Inline AGU Fuse Holder & 40A and 60A Fuse Included!
- True Sound 17 Feet FT Double Shielded RCA Cable
- High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
- All Accessories / Terminal Included! Perfect for Any Installer Shop.
Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1
- Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (74.1% efficient), 2 Ohm: 600 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (84.5% effic
- Peak: 4000 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating), High-Speed MOSFET Power Supply, Class D Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Phase Control Switch, Full IC-Controlled Protection Circuitry, Adjustable 0-18dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%
- S/N Ratio: >90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours straight, Extruded aluminum heatsink, Frequency Response: 10Hz – 300Hz
- Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money, Dimensions: (L x W x H) 14″ x 8.5″ x 2.24″, Weight:7.8 lbs
Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Cha
- 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power; 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged
- 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply; Series A/B car amplifier; Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
- INPUTS/OUTPUTS: Low level RCA inputs and outputs; Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA)
- FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode; Fully adjustable 24 dB crossovers; Designed to be high sound quality with minimal distortion; Maximum heat dissipation which minimizes distortion
- SPECIFICATIONS: Variable voltage: 0.2 5 volts; Signal to noise: > 90 dB; Frequency response: 10Hz 45KHz; Crossover type: Electronic switch FULL / LPF / HPF; Bass boost: 0 09 dB; Fusing: 20A x 2; Dimensions: 11.4 x 10.8 x 3.7 inches; Weight: 4.65 pounds; Manufacturer warranty: 1-year warranty
Best 1000 watt amp Buying guide
When considering purchasing a product, it is important to think about what you need and want the product to do for you. There are many factors that can influence your decision when it comes to choosing a product, such as price, quality, features, and more. It is important to compare products before making a final decision to ensure that you are getting the best possible value for your money. Here are the few things that you need to look at before purchasing a product:
1. What you will use the product for?
Another factor to consider before purchasing a product is what you will use it for. If you are only going to use it occasionally, there is no need to spend a lot of money on a high-end model. However, if you plan to use it regularly, it is worth investing in a quality product.
The price of the product is one of the most important factors to consider. You need to find a balance between quality and price. It is important to remember that cheaper does not always mean better. Sometimes, it is worth spending a little extra money on a high-quality product.
Another important factor to consider is the features of the product. Make sure that the product has all of the features that you are looking for. For example, if you are looking for a television, pay attention to things like picture quality, sound quality, and extra features like built-in Wi-Fi or Blu-ray player.
4. Brand name
One final factor to keep in mind is brand name recognition. In general, more well-known brands tend to charge more for their products. However, they also tend to be more reliable and offer better customer service.
5. Quality of the product
Your first priority should always be the quality of the product. It is advisable to read online reviews or ask friends and family for recommendations.
6. Customer service
A good company will have responsive and helpful customer service available in case you have any problems with your purchase.
7. The guarantees and warranties offered
Most products come with some kind of guarantee or warranty. Make sure to read the fine print before making a purchase.
8. The return policy
All reputable companies should have a return policy in case you are not satisfied with your purchase.
9. User reviews
Once you have narrowed down your options based on quality, it is time to read user reviews. These can be found on the website of the product or on online forums. Pay attention to both positive and negative reviews, as they can give you an accurate picture of what to expect from the product.
Frequently Asked Questions about 1000 watt amp
This section answers common questions about 1000 watt amp. Understanding people’s concerns is easier if you answer these questions.
Is this product worth investing in?
A product like this has a lot of value. A lot of unique features and easy to use
1000 watt amp can be sold in retail stores?
You don’t need to go to the store if you can get it delivered to your door.
When making a purchase, is after-sales service important?
When looking for a reliable 1000 watt amp company, make sure they offer excellent after-sales service.
In the event that any complaints have been filed against the company, they may need to be reconsidered.
It is also a good idea to inquire about a company’s return policy, as some only allow a limited number of returns per year and/or require a receipt for returns.